ASICS Gt-2000, Men's Gt-2000 9

Product Information

The safety components must be designed and constructed and be usable in such a way as to ensure that, in every case, their own operational integrity and/or the safety of the installation is ensured, as defined in the safety analysis in Annex III, so that their failure is highly improbable and with an adequate safety margin. Cableway installation may come within the scope of Council Directive 93/38/EEC of 14 June 1993 coordinating the procurement procedures of entities operating in the water, energy, transport and telecommunications sectors(5).

The manufacturer must lodge an application for assessment of his quality system with a notified body or his choice, for the components concerned. In the absence of harmonised European standards, Member States shall take the necessary measures to inform parties concerned of those existing national standards and technical specifications which are regarded as important or useful for ensuring proper transposition of the essential requirements referred to in Article 3(1).

A RUNNING SHOE WITH SEVERAL STABILIZING ELEMENTS 

Where a Member State or the Commission considers that a European specification as referred to in paragraph 2 does not entirely satisfy the essential requirements referred to in Article 3(1), the Commission or the Member State concerned shall bring the matter before the committee referred to in Article 17 giving the reasons therefor. The committee shall deliver an opinion without delay. The Member State concerned shall immediately inform the Commission of any such measure, indicating the reasons for its decision and whether non-conformity is due, in particular, to: the list of the European specifications referred to in Article 2(2) of this Directive, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements where the European specifications referred to in Article 2(2) of this Directive do not exist,

b) affix the CE conformity marking on the safety component and, on the basis of the modules laid down in Decision 93/465/EEC, draw up an EC declaration of conformity in accordance with Annex IV. Deceleration values must be within adequate limits fixed in such a way to ensure both the safety of the persons and the satisfactory behaviour of the vehicles, cables and other parts of the installation. which conform with the provisions in force in their territories on the date of entry into force of this Directive. Over my experiences of running in ASICS I have come to expect a balanced feeling when it comes to cushioning. This was not the case with the GT 2000 9. It was surprisingly firm. The notified body shall draw up the EC examination certificate in accordance with Annex VII and the technical documentation which accompanies it. The technical documentation must include all the necessary documents concerning the characteristics of the subsystem and, where appropriate, all the documents certifying the conformity of the safety components. It must also contain all the relevant details of the conditions of, and restrictions on, use and of the instructions for servicing.Stations and structures along the line must be designed, installed and equipped so as to ensure stability. They shall permit safe guidance of the cables, vehicles and the towing devices, and enable maintenance to be safely carried out, under all operating conditions. The safety analysis shall be the subject of a safety report recommending the measures envisaged to deal with any such risks and including a list of the safety components and subsystems which must be covered by the provisions of Chapter II or III, as the case may be. Vehicles and/or towing devices and, in particular, their suspension mechanisms must be designed and fitted so as to ensure the safety of workers servicing them in accordance with appropriate rules and instructions.